Bremas Boat Lift Switch Handle
Bremas Boat Lift Switch Handle
The Bremas Boat Lift Switch Handle is a replacement rotary cam handle that fits both series A-1700 Bremas Maintained (Lock-On) and series A-1700 Bremas Momentary (Spring-Loaded) boat lift switches. Features a highly visible safety red handle and a set screw to secure the handle to the box. Easy, textured grip. Made from high-strength plastic. The replacement handle fits on all Bremas brand control boxes sold by BH-USA.
Installation Instructions
Do not attempt to screw the Bremas switch handle into the mounting shaft of the Bremas control box without following these steps. You will damage the Bremas switch handle.
Step 1: Remove the mounting screw from the Bremas switch handle before installing it on the drum switch.
Step 2: Install the Bremas switch handle on the Bremas drum switch mounting shaft. The handle should be flush to the face of the control box. If the handle will not fit flush, slightly bend the expansion tabs to fit flush on the drum switch.
Step 2: Insert the mounting screw into the mounting hole on the Bremas switch handle.
Step 3: Tighten the mounting screw. Be careful not to overtighten the screw.
Step 4: Operate the switch back and forth to test the handle is secured to the control box.
Due to customer feedback, we are aware that the UPS ground shipping charge on this product exceeds the price of the product. BH-USA does not control shipping charges as these are set by UPS. Please be aware of the shipping charge before you purchase this item.
Specifications
Dimensions:3 in. L x 1 3/16 in. W x 1 5/16 in. HType:Rotary Cam HandleMaterial:PlasticHandle Style:RoundWeight:.05 lbs.Color:RedSurface:TexturedHandle Length:3 in.Screw Type:PhillipsScrew Dimensions:20 mm L x 3 mm WScrew Style:Pan headScrew Mounting Type:Thread-forming (plastic)Round Base Diameter:1 1/4 in.Mounting Screw Hole Diameter:1/4 in.Replacement:Bremas boat lift switch handleSKU #:12112UPC #:816146020921
Product Overview
Injection-molded red handle
Includes stainless steel mounting screw
Made from high-density plastic
Fits all Bremas drum switches
Textured & rounded edges for a softer grip
Bremas Boat Lift Switch Handle
The Bremas Boat Lift Switch Handle is a replacement rotary cam handle that fits both series A-1700 Bremas Maintained (Lock-On) and series A-1700 Bremas Momentary (Spring-Loaded) boat lift switches. Features a highly visible safety red handle and a set screw to secure the handle to the box. Easy, textured grip. Made from high-strength plastic. The replacement handle fits on all Bremas brand control boxes sold by BH-USA.
Installation Instructions
Do not attempt to screw the Bremas switch handle into the mounting shaft of the Bremas control box without following these steps. You will damage the Bremas switch handle.
Step 1: Remove the mounting screw from the Bremas switch handle before installing it on the drum switch.
Step 2: Install the Bremas switch handle on the Bremas drum switch mounting shaft. The handle should be flush to the face of the control box. If the handle will not fit flush, slightly bend the expansion tabs to fit flush on the drum switch.
Step 2: Insert the mounting screw into the mounting hole on the Bremas switch handle.
Step 3: Tighten the mounting screw. Be careful not to overtighten the screw.
Step 4: Operate the switch back and forth to test the handle is secured to the control box.
Due to customer feedback, we are aware that the UPS ground shipping charge on this product exceeds the price of the product. BH-USA does not control shipping charges as these are set by UPS. Please be aware of the shipping charge before you purchase this item.
Specifications
Dimensions:3 in. L x 1 3/16 in. W x 1 5/16 in. HType:Rotary Cam HandleMaterial:PlasticHandle Style:RoundWeight:.05 lbs.Color:RedSurface:TexturedHandle Length:3 in.Screw Type:PhillipsScrew Dimensions:20 mm L x 3 mm WScrew Style:Pan headScrew Mounting Type:Thread-forming (plastic)Round Base Diameter:1 1/4 in.Mounting Screw Hole Diameter:1/4 in.Replacement:Bremas boat lift switch handleSKU #:12112UPC #:816146020921
Product Overview
Injection-molded red handle
Includes stainless steel mounting screw
Made from high-density plastic
Fits all Bremas drum switches
Textured & rounded edges for a softer grip
Bremas Boat Lift Switch Handle
The Bremas Boat Lift Switch Handle is a replacement rotary cam handle that fits both series A-1700 Bremas Maintained (Lock-On) and series A-1700 Bremas Momentary (Spring-Loaded) boat lift switches. Features a highly visible safety red handle and a set screw to secure the handle to the box. Easy, textured grip. Made from high-strength plastic. The replacement handle fits on all Bremas brand control boxes sold by BH-USA.
Installation Instructions
Do not attempt to screw the Bremas switch handle into the mounting shaft of the Bremas control box without following these steps. You will damage the Bremas switch handle.
Step 1: Remove the mounting screw from the Bremas switch handle before installing it on the drum switch.
Step 2: Install the Bremas switch handle on the Bremas drum switch mounting shaft. The handle should be flush to the face of the control box. If the handle will not fit flush, slightly bend the expansion tabs to fit flush on the drum switch.
Step 2: Insert the mounting screw into the mounting hole on the Bremas switch handle.
Step 3: Tighten the mounting screw. Be careful not to overtighten the screw.
Step 4: Operate the switch back and forth to test the handle is secured to the control box.
Due to customer feedback, we are aware that the UPS ground shipping charge on this product exceeds the price of the product. BH-USA does not control shipping charges as these are set by UPS. Please be aware of the shipping charge before you purchase this item.
Specifications
Dimensions:3 in. L x 1 3/16 in. W x 1 5/16 in. HType:Rotary Cam HandleMaterial:PlasticHandle Style:RoundWeight:.05 lbs.Color:RedSurface:TexturedHandle Length:3 in.Screw Type:PhillipsScrew Dimensions:20 mm L x 3 mm WScrew Style:Pan headScrew Mounting Type:Thread-forming (plastic)Round Base Diameter:1 1/4 in.Mounting Screw Hole Diameter:1/4 in.Replacement:Bremas boat lift switch handleSKU #:12112UPC #:816146020921
Product Overview
Injection-molded red handle
Includes stainless steel mounting screw
Made from high-density plastic
Fits all Bremas drum switches
Textured & rounded edges for a softer grip
