Welcome to Boat Hoist of Alabama,
Welcome to Boat Hoist of Alabama – Elevate Your Time on the Water 🚤⚓
Boat Hoist of Alabama is your trusted source for high-quality boat lifts, pulleys, and marine hardware in Alabama. Made in the USA, all-in-one lift systems. There is no need to go anywhere else; we supply everything needed for installation. We specialize in durable, easy-to-install systems for pontoons, fishing boats, and personal docks. With reliable products, expert support, and fast service, we help you protect your investment and enjoy more time on the water. Serving marinas, installers, and DIY customers statewide. We provide top-quality, marine-grade boat lift solutions to protect your boat, simplify storage, and extend its longevity. Whether you own a fishing boat, pontoon, or luxury vessel, our lifts are built to withstand the most demanding marine conditions, ensuring a smooth, stress-free experience every time you get on the water.
Our Premium Boat Lift Solutions
We specialize in all-inclusive boat lift kits that provide everything you need for a seamless and durable installation. Our products include:
✅ Complete Boat Lift Kits
Our lift kits are designed for easy installation and long-lasting performance, with every component engineered for strength, reliability, and corrosion resistance. Each kit includes:
✔️ Heavy-duty galvanized beams – Built to withstand harsh marine conditions.
✔️ Marine-grade cables – Durable and rust-resistant for smooth operation.
✔️ Motors & gear plates – Powerful, high-efficiency motors designed for longevity.
✔️ Bumper pads & protective accessories – Prevents damage to your boat and dock.
✔️ Carpeted boards & brackets – Ensures a secure and gentle hold on your boat.
✔️ All essential mounting hardware – No missing parts—just a complete, ready-to-install system!
⚙️ Customized Lift Solutions
We know that every boat is unique, which is why we offer:
🔹 Adjustable lift configurations – Perfect for pontoons, fishing boats, wake boats, and more.
🔹 Custom-built options – Need a special size or capacity? We can help!
🔹 Expert recommendations – Our team will assist you in selecting the perfect boat lift solution for your specific vessel and docking setup.
💪 Heavy-Duty Construction
Our products are made with marine-grade, galvanized materials to ensure:
✅ Maximum strength & durability – Resistant to rust, corrosion, and harsh weather.
✅ Smooth & quiet operation – No more struggling with unreliable hoists!
✅ Long-term reliability – Built to handle heavy loads and frequent use.
Why Choose Boat Hoist of Alabama?
🔹 Quality Guarantee – We use only the best materials for long-lasting performance.
🔹 Expert Assistance – Our team is ready to guide you every step of the way.
🔹 Customer-Centric Approach – We put our customers first, offering personalized support.
🔹 Fast & Reliable Shipping – Get your boat lift kit delivered quickly and hassle-free!
Take the First Step Today!
🚤 Protect Your Boat & Upgrade Your Dock Today! 🚤
Enhance your boating experience with a high-quality, marine-grade boat hoist solution. Explore our products or reach out to us for expert guidance!
📞 [205] 422-1077 | 📧 [orders@bhofal.com] | 🌐 [www.bhofal.com]
Stay Connected!
For the latest updates, exclusive offers, and expert tips, follow us on social media and become part of the Boat Hoist of Alabama community! 🚤💙
Boat Hoist of Alabama – Your Go-To Source for Quality Boat Lift Parts & Accessories
At Boat Hoist of Alabama, we believe your boat deserves the best. That’s why we offer only American-made parts designed for durability, reliability, and performance you can count on. Whether you’re a homeowner, dock builder, or marine contractor, we have everything you need to keep your lift running smoothly — all in one place.
8,500 lb. Advanced Gear Plate Assembly
The 8,500 lb Advanced Gear Plate Assembly is a dual belt pulley gear plate that has a lifting capacity of 8,500 lbs. Assemblies include the 10-inch aluminum die-cast hoist pulley, 96-tooth bronze worm gear assembly, extended block bronze steel assembly, and 34-inch drive belt.
There are no steel-on-steel moving parts. It has been assembled and tested by the manufacturer. Lifetime warranty included. You can choose between galvanized steel or powder-coated steel for the backplate. This item ships in a single box.
The extended block worm assembly has a 2-inch bearing block, a worm on a driveshaft, and an aluminum housing with 1/4 inch grease fittings. Attaches directly to the gear plate. The assembly has standard flat-plate mounting holes.
The 96 tooth worm gear assembly comes assembled with the gear, sleeve, backplate bearing, axle sleeve bolt, and snap rings. 1/4 inch easy-reach grease fittings are included. The gear fits standard gear plates used in flat-plate hoists.
The 10 in. Aluminum Die-Cast Hoist Pulley is made from an aluminum die-casting process. Over 15 years of use on BH-USA Flat Plate hoists. They are much stronger in marine environments. They will not swell or bend. The belt-gripping technology on the inside of the pulley prevents belt slippage. Compatible with any known flat-plate hoist. Resistant to warping. Designed to fit drive belts better. The bore is 3/4 inches. Accepts belts up to 1/2 inch.
The AX-34 is a 34-inch drive belt that is compatible with all flat-plate boat hoists from BH-USA. This belt is the perfect length to fit around a 10-inch hoist pulley and to be able to attach it to a 2-inch motor pulley. As the motor’s driveshaft turns, the pulleys turn the belt in order to complete the movement of the hoist.
Gear plates from the Advanced Series feature bronze 96 tooth worm gear assemblies and extended block steel worm assemblies. They are designed to be used with boat lift motors of up to 1 1/2 HP. The only difference between the 7,500 lb and 8,500 lb gear plates is their pulleys. A single belt pulley is used on the 7,500 lb and a dual belt pulley is used on the 8,500 lb.
Never use the same material for both worm gears. The use of steel-on-steel or bronze-on-bronze is not recommended for flat-plate hoists. Return policy.
Standard SeriesName:BH-30BH-40GPA:4,000 lbs4,000 lbsHP:3/41Duty:StandardStandardWorm:BronzeBronze96 Tooth:Cast IronCast IronBlock:ShortShortPulley:SingleSingleDeluxe SeriesName:BH-35BH-45BH-65GPA:6,500 lbs6,500 lbs6,500 lbsHP:3/411Duty:StandardStandardHDWorm:BronzeBronzeBronze96 Tooth:Cast IronCast IronCast IronBlock:ExtendedExtendedExtendedPulley:SingleSingleSingleAdvanced SeriesName:BH-75BH-85GPA:7,500 lbs8,500 lbsHP:1 1/21 1/2Duty:StandardStandardWorm:SteelSteel96 Tooth:BronzeBronzeBlock:ExtendedExtendedPulley:SingleDual
All Flat-Plate Hoists use Elite Motors painted wired boat lift motors.
Specifications
Rated Capacity:8500 lbsTest:Straight-lineDimensions:12 in. L x 24 in. HPlate Thickness:1/4 in.Bull Gear Ratio:96:1GPA Warranty:LifetimeExtended Block Worm AssemblyWorm Material:Hardened steelThread:SingleThread Direction:Right handWorm Diameter:1 3/4 in. Worm Length:2 in.Worm Bore:.754 in.Grease Fittings:3Fitting Size:1/4 in.Dimensions:1 1/4 in. x 1/2 in.Collars Included:2Collar Set Screw:5/16 in.96 Tooth Worm Gear AssemblyMaterial:932 BronzeGear Bore:2.875 in.Diameter:12 3/4 in.Hub Depth:2 in.10 in. Pulley & AX-34 BeltMaterial:AluminumType:Die-castHolds:2 beltsSize:10 in.Bore:3/4 in.Belt Size:34 in.Type:CoggedHoist Pulley Fits10 in.Motor Pulley Fits:2 in.
Product Overview
8,500 lb. straight line capacity
Assembled and tested under load
No steel-on-steel moving parts
Includes 1hoist pulley & hoist belt
Uses bronze 96 tooth worm gear
Lifetime Warranty
The 1.5 HP Elite TENV Bremas Wired Motor with Base is a single-phase, dual-voltage boat lift motor. It has a fully painted housing. The welded base of the motor is compatible with standard mounting patterns found on flat-plate gear plates, which are commonly used in boat hoists to lift and lower boats.
This motor is engineered to seamlessly integrate with a range of flat-plate hoists from reputable brands like Boat Hoist USA, ACE Labs, American Power Hoist, AMS, and Hefty Hoist. It comes with detailed wiring instructions compatible with Breams and Salzer drum switches, ensuring smooth installation and operation. Additionally, it is fully compatible with remote controls from GEM, Galaxy, TEC, and Elite for convenient and efficient boat lift operation. Furthermore, this motor is equivalent to the Leeson boat hoist motor #6439191252, providing comparable performance and reliability.
You can choose between a Bremas maintained (lock-on) or momentary (spring-loaded) boat lift switch. Both switches are connected with 14/5 SJTW control cable, with the in-line GFCI located 4 1/2 inches away from the plug. The type of plug and GFCI wired to the wiring harness depends on your motor voltage selection.
This motor has a power of 1.5 horsepower (HP) and can operate on either 115 volts or 230 volts. At 115 volts, it draws 20.0 amps, and at 230 volts, it draws 10.0 amps. It spins at a speed of 1725 revolutions per minute (RPM) with a frequency of 60 Hz. It fits into frame 56 and has a service factor of 1.0. It is classified as Type C, suitable for various applications. It can handle temperatures up to 40°C for a maximum of 15 minutes. The housing is Totally Enclosed Non-Ventilated (TENV) with a code of L. It has insulation class B and is recognized by UL with a C-UL-US stamp.
Totally Enclosed Non-Ventilated (TENV)
A Totally Enclosed Non-Ventilated motor is a type of electric motor that is enclosed to prevent the ingress of foreign particles (dust, moisture, etc.) but does not have external ventilation openings for air circulation. Unlike some other motor types, TENV motors do not rely on external airflow for cooling and are designed to operate in a sealed environment.
When wiring or rewiring electrical components, BH-USA recommends hiring a licensed electrician.
Specifications
General Specifications
Weight:35 lbs.Individual Box Size:15 in. x 10 in. x 10 in.Product Length:13.0 in.Product Width:6.50 in.Product Height:9.50 in.Shaft Width:0.625 in.Shaft Length:2 in.Country of Origin:ChinaModel #:93043Retail SKU:93077
Nameplate Specifications
HP:1.5 (1 1/2)Voltage:Dual (115v / 230v)Phase:1Amps:20.0 (115v) / 10.0 (230v)RPM:1725Hz:60Frame:56Service Factor:1.0SFA:NAType:CAMB:40°cTime:15 MINHSG:TENVCode:LInsulation:BThermally Protected:NoneUL:RecognizedUL Stamp:C-UL-US
Technical Specifications
Electrical Type:Capacitor StartRotation:SelectiveShaft Type:NEMA 56Shaft Extension:1.88 in.Frame Length:9.75 in.Mounting:Resilient Base – Extended StudsDrive End Bearing:BallOpp Drive End Bearing:BallFrame Material:Rolled SteelReplacement Capacitor:650 uFCapacitor SKU #:BH02249Keystock:IncludedKeystock Length:1 5/16 in.Keystock Width:3/16 in.
Boat Lift Switch Specifications
Maintained
Momentary
Model #:CA0200034I-B96IQ6RModel #:CA0200037I-B96IQ6RRetail SKU #:BH09014Retail SKU #:BH09015Weight:1.25 lbs.Weight:1.25 lbs.Box Color:Light GreyBox Color:Light GreyHousing Length:4.5 in.Housing Length:4.5 in.Housing Width:3.5 in.Housing Width:3.5 in.Housing Height:4.5 in.Housing Height:4.5 in.Handle Color:RedHandle Color:RedHandle Length:3.0 in.Handle Length:3.0 in.Handle Width:1.1875 in.Handle Width:1.1875 in.Handle Height:1.3125 in.Handle Height:1.3125 in.Country of Origin:ItalyCountry of Origin:Italy
Technical Specifications
Maintained
Momentary
Amps:20Amps:20VAC600VAC600Torque:TightTorque:TightCertification:EN 60947-3Certification:EN 60947-3Certification:CECertification:CECertification:C-UL-US ListedCertification:C-UL-US Listed
GFCI Wire Harness Specifications
110v
220v
Manufacturer:Southwire CompanyManufacturer:Southwire CompanyPlug Type:3-US 110 V StandardPlug Type:US 240 Volt NEMA 6-15VAC:125VAC:240Hz:60Hz:50/60Amps:15Amps:15Watts:1875Watts:3600Type:Rainproof Class AType:Rainproof Class AGFCI Type:In-lineGFCI Type:In-lineCable Type:14/5 SJTWCable Type:14/5 SJTWGFCI to Plug:4.5 in.GFCI to Plug:4.5 in.Cord Diameter Range:0.28 – 0.65 in.Cord Diameter Range:0.28 – 0.65 in.Country of Origin:HondurasCountry of Origin:HondurasUL:ListedUL:ListedCSA:CertifiedCSA:CertifiedReset Button:YesReset Button:YesReset Type:AutomaticReset Type:AutomaticBH-USA SKU:12211BH-USA SKU:12228Catalog #:303385214Catalog #:25090
Pontoon Bunk Kit with Hardware – Complete Support System for Pontoon Lifts
Overview
The Pontoon Bunk Kit is a heavy-duty support system designed to provide secure and stable storage for pontoon boats on boat lifts. This complete kit includes four (4) pontoon bunks, bottom plates, and all necessary hardware for a reliable and hassle-free installation.
Built with marine-grade materials, these bunks ensure proper weight distribution and hull protection, preventing damage while offering a cushioned, non-slip surface for your pontoon. Whether upgrading an existing boat lift or installing a new system, this kit provides durability, stability, and ease of use.
Product Features & Components
✅ Includes Four (4) Heavy-Duty Pontoon Bunks – Designed to cradle and support pontoons evenly, preventing hull stress.
✅ Bottom Plates for Secure Mounting – Provides reinforced stability to hold bunks in place under heavy loads.
✅ Complete Hardware Kit Included – Comes with bolts, washers, and fasteners for easy and secure installation.
✅ Marine-Grade Construction for Maximum Durability – Built to withstand constant exposure to water, UV rays, and harsh weather.
✅ Non-Marking, Protective Surface – Ensures smooth contact with pontoon hulls, preventing scratches and scuffs.
✅ Easy Installation & Universal Fit – Pre-drilled mounting points allow for a quick, hassle-free setup on most boat lifts.
Specifications
• Set Includes: Four (4) Pontoon Bunks, Bottom Plates, Complete Hardware Kit
• Material: Heavy-Duty Marine-Grade Construction
• Mounting Hardware: Bolts, Washers, and Fasteners Included
• Weather Resistance: UV-Resistant, Water-Resistant, and Built for Harsh Marine Environments
• Application: Pontoon Boat Lifts, Dock Systems, Marine Storage Solutions
• Mounting: Pre-Drilled for Secure Installation
Benefits
✔️ Provides Maximum Hull Support – Ensures proper weight distribution to protect pontoons from damage.
✔️ Durable & Corrosion-Resistant – Marine-grade materials withstand harsh environments for long-lasting performance.
✔️ Pre-Drilled for Easy Installation – Quick and secure setup with all necessary hardware included.
✔️ Non-Slip & Protective Surface – Prevents hull scratches and scuffs, ensuring safe storage.
✔️ Versatile & Heavy-Duty – Designed for pontoon lifts and dock-mounted storage solutions.
The Pontoon Bunk Kit with Hardware is an essential upgrade for pontoon boat owners, providing stable, secure, and long-lasting support for lift systems and storage setups.
📞 For bulk orders or additional customization, please call or email for details.
Introduction of the CEOs of Boat Hoist of Alabama, Brent and Jennifer Timmerman. Brent, who has been involved in manufacturing boat parts for eight years, assumed ownership of the business two years ago. With over 20 years of experience in fabrication, Brent brings a seasoned perspective to the company. Additionally, Jennifer and Brent, who have been married for 13 years, collaborate to steer Boat Hoist of Alabama towards success.
